Plastic Pellets Thermoplastic Polyester Elastomer TPEE 

Introduction of the product Properties of Thermoplastic Polyester Elastomer (TPEE) By adjusting the ratio of soft and hard segments, the hardness of polyether ester elastomer can be from Shore D (32 to 82), and its elasticity and strength are between rubber and plastic. Compared with other thermoplastic elastomers TPE, the modulus of polyether ester elastomer is higher than other thermoplastic elastomers with the same hardness under low strain conditions. When modulus is an important design criterion, the use of PEEE elastomers reduces the cross-sectional area of the product and reduces the amount of material used. Polyetherether elastomers have very high tensile strength. Compared with polyurethane (TPU), the compression and tensile modulus of polyether-ester elastomers are much higher, and when the same part is made from polyether-ester elastomers of the same hardness as TPU, the former can withstand much greater loads. Above room temperature, polyether ester elastomer be…